Criminal investigation Essay Example | Topics and Well Written Essays - 1250 words - 1

Criminal investigation - Essay Example uthouse having hay or grain therein; any barrack, rick or stack of hay, grain, or bark; any public building, church or meeting-house, college, school or library. (Arson, lectlaw, n.d). Chapter 806.01 of the Florida Statutes, considers a person guilty of arson if that person wilfully and unlawfully or while in the commission of a felony by fire or explosion damages or causes to be damaged any structure, or structure in which people are usually present for example – jails, prisons, hospitals, department stores, offices, churches, educational institutions, during the time when these are occupied as also, the damaging by these means of any structure which this person knows is occupied. Such a person is deemed to be guilty of arson in the first degree. This constitutes a felony of the first degree, punishable as per the provisions of sections 775.082, 775.083 or 775.084. These Statutes further, state that a person who commits an act of arson which results in physical harm to any other person, irrespective of intent to cause such harm, is considered to be guilty of misdemeanour of the first degree. This is punishable under sections 775.082 and 775.083. (The 2005 Florida Statutes n.d). According to this definition intent is not an important criterion in deciding whether a person is guilty of arson or not. In the case under consideration the accused agreed that he had applied a flame to the canvas litters. He stated that he did this to determine whether the canvas litters were fire proof or not. Though he had no intention of causing harm to anyone or any property he wilfully started the fire. As per the Statutes he is guilty of arson. As a consequence of this fire one person died due to asphyxiation while others were injured. In view of the above, John Notthink is guilty of arson of the first degree and is punishable under sections 775.082, 775.083 and 775.084 for first degree arson, which is a felony of the first degree. To prove an arson charge it is sufficient if it

WALMART-international corporation Research Paper

WALMART-international corporation - Research Paper Example The company has worked very hard to get into this position by pursuing right strategies in both national and international regions. The organization thrives as an efficient merchandiser with effective processes and systems. These strategies have contributed to the overall buying power, superior growth and leadership in various systems such as logistics and supply chain. The company is headquartered at Bentonville, Arkansas, United States. The company has established more than eighty-five thousands stores across the globe. Product portfolio of the company includes, apparel, footwear specialty, supercenter, discount store, warehouse club, cash & carry, superstore, hypermarket and supermarket. The strategies of corporate management include selling products of high quality and high brand name and it lowest prices (David 293-298). The low prices are kept by reducing the overall operational costs through the use of advanced and unique electronic technology and unmatched warehousing. Mercha ndising deals are negotiated directly from the manufacturers which eliminate the work of middle men and save a lot of costs. The community outreach of Wal-Mart is focused on various goals such as involvement with local community services, customer satisfaction, providing scholarships for higher studies etc. The major emphasis of the company is on environmental and child issues. Mission and Goals Mission and goals are the building blocks of an organization. They guide the actions of an organization and define the goals and objectives. Whether an organization is big or small, to have a mission is the first step for setting up a business. The mission and purpose of Wal-Mart is to save the money of its customers so that they can have a better life. Apart from that, the purpose of the company is derived from the philosophy of the company’s founder. The motto of the retail giant is to work together and lower the living cost for everyone (Ahmed 23-30). This will provide an opportuni ty for the world in terms of saving money and enjoying a better life. Core Competencies Competitive advantage for Wal-Mart lies in its ability of cost differentiation and strong distribution channel across the globe. Cost leadership and distribution strategy of Wal-Mart has created barrier for competitors to copy the strategy of Wal-Mart (Gagnon 130-135).Expanded distribution channel of the company has helped them to sell products to large base of customers and increase market saturation for competitors. Wal-Mart follows a low cost leadership strategy. Macroscopic view of Wal-Mart’s competitive strategy shows that the company uses a resource based model in order to develop a value chain proposition which can’t be matched by competitors. With the help of the resource based view (RBV) model, it can be summarized that Wal-Mart has three major resources which are tangible, intangible and human resources, in order to create and maintain strategic capabilities. Resource capa bilities of Wal-Mart can be explained in the following manner. Access to both tangible and intangible resources has helped Wal-Mart to achieve the capabilities which has established the departmental chain as a global market leader.

Australian Health Policy Models

Australian Health Policy Models Health policy is the action, plan and decisions taken to attain specific health care goals within the society. As the technology is advancing, the priorities of the people have been changed. Along with this the people are aware of the health issues and they want to reduce the level of diseases, premature death and want to secure themselves and their families from disease produces discomfort. To overcome this fear of the person, Public Health infrastructure is created and it refers to the legislative, informational and administrative system for developing health policies. (World health organisation) Australian Government has a big financial role and broad policy leadership structure in health matters. The State Legislatives fulfil their role in delivering public sector health services and coordinates with the working of health workers in public and private sectors. The Government facilitate in planning and developing the national public health policies by identifying and researching on public health issues. In every country the process of developing health policies depend on how the government takes care and solves the problem in the society. Government institutions form the alternatives to the issues and select the solutions which are evaluated, implemented and revised if required. For this the main agenda for the health policy is planned after the minute research about the health status of the country. The agenda setting is the process of highlighting and seeking the attention of the Government towards the problem so that the solution can be considered. It is the result of the policy process involving executive branch leaders, legislators, influential stakeholders and public. (National Public Health Partnership) Though people of Australia have a fantastic overall health record, but the people want a public health policy related to free health care in Australia. There was a policy analysis resulted with the current health issue in the health sector of Australia, which is becoming a major health issue in the future times. The policy instruments related to the particular set of problems are analysed. The policy instruments are the tools like taxes, spending, incentives and legal and voluntary regulations used by Government. (Cairney, 2013) While designing the free health care policy for the public, there are certain points which should be discussed in the agenda. The issue should be important enough to be consulted in the legislations. Subsequent and emergency movements are used for initiating the policy making process. Number of problems are listed and merit that considers the problem. For planning on the health policy there are myriad of problems and issues that demand attention. If the issue is quite surrounded by the noise of the public, the issue becomes important and gets its way onto the agenda. As the agenda for the issue for free health policy for Australians is introduced and discussed it is not a hundred per cent surety that it will be accepted as the formation of the legislation. Not all the agendas that get into policy process form the end up forming the law as the formation of legislation is a complex process. It is because of the lack of time, information, resources and many more other things. Certain issues should be strategically planned to put in the agenda. (Boundless) There are theoretical approaches that explain the health policy agenda settings. The kingdom model: The Kingdom model refers the process of agenda setting in which, problems, their solutions and political circumstances are coming together. This model is based on the fact that the only problems cannot justify legislations, there are reasonable solutions to it. The kingdom model was introduces in 1965 and it explains the issues like how to highlight the problems in the agenda and how the alternative solutions to the problems are devised. It tells about the three streams, they are problems, policy and politics and the window of opportunity. The kingdom model considers them as the four important concepts. Problem stream considers that all the problems cannot be considered while creating a policy. So the problems have to be urgent or important. While developing the free health policy the first problem is felt by the legislators that the individual will need to get locked to the job because he does not want to lose the policy. The other problem is the individual’s location. People travel to different places to attain the best opportunity and the free health care and have to find the free clinics in the panels. The access is the other problem related with the free health care as this facility rely on the external funding and there could be a long waiting period to avail it. After attaining the policy, people will face a problem to get the appointments as there too will be long waiting period. The burden on all the parties is increased as the policy holders are more than the suppliers. In the free medical care sector, the quality of the medical care is another problem. It’s not due to the working efficiency of the workers related to the free health care sector, but because of the lack of the latest equipments at the free health care centres. The good doctors and nurses can also not do their job well when there is the lack of the medical facilities. As the waiting period to avail the free health care is so long, the follow up to the problem of the patient is the another issue. When the problem affects a large number of people, they take their steps towards the agenda. The major role of Advanced practice nurses are that they utilise the full opportunity to bring the issue of free health care policy for Australians on the agenda. (Roberts, n.d) Every problem has a solution. The policy actors work on it and create policies which are considered as the solutions to the relative problems. This reduces the speed of the policy making procedure as all the possible solutions to all the problems are considered. The health care researchers do complete justice in analysing the developing the alternative solutions to all the problems related to free health care for Australians. This research influences the process of policy making decisions. The Governmental research and implementation of the policy making decisions are different from the private sectors as this have different consequences being related to the large number of people. So the Rational decision making process first defines the problem, develops an alternative solution, evaluate the solution and plan to implement and add it in the agenda. The relevant solutions to the problems related to the free health care for Australians can be to create a single payer system, negotiati ng the lower prices for drugs, one universal set of insurance policies, procedures and uniform set of regulations. This could save a large amount of money and that could be utilised in the free health care projects. (Public Agenda) According to the Kingdom Model, the third stream is the political circumstances. The most complex procedure in the window opportunity is the political circumstances related to each problem and their potential alternative solutions and to make the policy maker to take actions. The agenda should be appropriate otherwise one policy and the support it is overshadowed by some other policies and their support. The factors that affect the political circumstances are the concern, public attitude and opinions about the issues of the policymakers in the legislative and executive branches of Government. When the Country is involved in some risk or threatened like the threat to the security, civil wars, recession, the health policy is treated in a different manner. This also depends on the factors that influence the importance and the economic conditions of the country. The other theoretical approach to explain Health policy agenda setting is the Hall’s model. Hall’s model: Hall proposed that if the issues have to seek Government’s attention. For this proper promotion of the issue is required. This means the Government should feel that the requirement of the policy is very high in the real world. The Government should feel the efficiency of the policy in relation to the cost. So basically Hall model suggests that when an issue becomes very responsive in terms of their feasibility, legitimacy and support, they get the place in the Government agenda. Legitimacy: It is a characteristic of issues because of which the Government understands and believe that they should be concerned to the issues and to feel a right to intervene. Every citizen of the country expects from the Government to work for their betterment and keep the law and order and to defend the country and its citizen’s from any kind of attack and risks. Feasibility: It is related to the potential of the Government to implement the policy. It needs the existence of the resources, skilled staff, technical and theoretical knowledge, necessary infrastructure and capable administration. If there is a lack of financial, workforce and technology, the policy may not be implemented. It doesn’t matter that how high the legitimacy is, the calibre in the Government is required. Support: It is related to the public support to the Government regarding the implementation of the policy. The media also plays an important role in creating awareness among the people and letting them know that what is there in the agenda to be discussed. In the implementation process of health policies, the government expect the support of the community and health care sector. If the Government is lacking in getting the support, it will be difficult to put the issue in the agenda. (Kazmi, n.d) Losing agenda settings: Sometimes due to change in the conditions like political issues, change of Government or decision maker removes the attention of the Government from the agenda. This leads to the losing of agenda settings. Sometimes the problems highlighted in the agenda get vanished and changes the agenda settings. This also results in the losing of agenda. Sometimes people get accustomed with the problem, and they do not feel it as problem anymore. Agenda settings are also loosed in such situations. (Anggoro, 2012) How a Bill becomes a law: As discussed earlier that only a few of the proposed legislation actually succeed to become a law. If any agenda dies in the middle of the session, it has to be resubmitted and reintroduced in the new session to become a law. The bill may die because of the disagreement between the members and amendments in the original bill. Bill origination: The members of the house representatives present the bills with specific agendas. Most of the bills are presented by the legislators. There ideas come from the supporters, president and the interest groups. They have executive communication between them. Proposal does not matter, in the end the member of the house introduces the legislation. Drafting the legislation: The staff members of the bill’s sponsor draft the legislation. Ultimately they are responsible for the language written and used in the legislation. Introduction of the Legislation: The bill is then presented in both the houses and a debate and discussion on it done. If maximum number of the members speak in favour and are keen to implement the policy in the country, they send this bill in the standing committee which has jurisdiction for the bills. Legislative committees with health policy jurisdiction: Majority of the health bills are referred to the senate committee on labour and human resources and the house committee on commerce. Report comes out of committee: A hearing is conducted in the committee. The whole bill is evaluated line by line and the amendments are done if required. Similar bills are combined at the same time. If the bill comes of the committee, a member makes a report on it mentioning the final points to be finalised and the reasons that why the committee is in its favour. Any bill that does not succeed to come out of the committee is considered as a die bill and is reintroduced in the next session with improvements. Action: Considering the amendments on the bill and the final report of the committee, once again a debate takes place in both the houses. If the amended bill is passed to the houses, it is further sent to another chamber where the referrals again consider this bill for evaluation. When the bill is passed through the chamber, it is sent to the conference committee for action. Conference Committee actions: The bill is finally evaluated and analysed in the conference committee. A final report is drafted in support of the bill and is sent to all the houses and chambers for voting. If there is a majority of agreement from houses and chambers, the bill is finalised and is sent to the president for action. If there is disagreement at any step, the bill dies. Presidential action: If the president signs the bill, it can become the law immediately. He can even reject the bill by veto. The bill becomes law within ten days of the signatures of the president. (Creating an agenda and developing legislation) The health policies play a vital role in a human’s life to live without stress. People expect to utilise their tax for the reasonable purpose and availing health policies are one of them. The Australian citizens expect a free health care from the Government and for this purpose the policy agenda has to be drafted and should be successful in becoming a law. The above discussion lets an individual know about the steps required to design and develop a policy. Many people associated with many departments and sectors come together and work efficiently to frame it. The teams are conducted to research about the important agendas having issues and relative solutions. The collective hard work and support makes a normal bill to become an important law. (Furlong, n.d) References: Creating an agenda and developing legislation, Retrieved from https://faculty.unlv.edu/ccochran/HCA452_652/Agenda_and_legislation.html Boundless, Issue Identification and Agenda Building, Retrieved from https://www.boundless.com/political-science/domestic-policy/policy-making-process/issue-identification-and-agenda-building/ Furlong, E. Agenda Settings, Retrieved from http://samples.jbpub.com/9781449665098/97768_CH02_Milstead.pdf Roberts, J., E How: Problems with Free Health Care, Retrieved from http://www.ehow.com/about_4777901_problems-free-health-care.html National public Health Partnership, Public Health, Retrieved from http://www.nphp.gov.au/publications/broch/defin.htm Kazmi, N., Scribd: Role of State in Health Policy, Retrieved from http://www.scribd.com/doc/15107462/Role-of-State-in-Health-Policy Cairney, P., (2013), Policy and Policymaking in UK, Retrieved from http://paulcairney.files.wordpress.com/2013/08/chapter-2-20-8-13-cairney-policy-policymaking-uk.pdf Public Agenda, Citizen’s Solution Guide 2012, Retrieved from http://www.publicagenda.org/pages/csg-health-care World Health Organisation, Health Policy, Retrieved from http://www.who.int/topics/health_policy/en/ Anggoro, Y., (2012), The Use of Multiple Streams Framework in Agenda Settings, Retrieved from http://yudoanggoro.com/tag/agenda-setting/

Effective Use of Color in William Gibsons Neuromancer :: Neuromancer Essays

Effective Use of Color in Neuromancer As I sit in my chair and type this essay, I am amazed to see myself staring into the computer next to me and wondering if William Gibson was indeed correct. The screen, which is a dark gray, has been put on "sleep mode" by Windows 98 but has not been powered off. It is not only the monitor that troubles me as I stare blankly into it, but rather, it is "the color of television, tuned to a dead channel." This is how Gibson touches the reader in Neuromancer. He uses images of colors with which the human eye is all too familiar, and, more specifically, he uses shades of these colors. One color, which particularly stands alone in Gibson's use and effectiveness, is gray. It represents so much in the novel and adds incredible dimensions beyond simple description. With the opening line, the coloring reveals the nature of his futuristic Earth. "The sky above the port was the color of television, tuned to a dead channel." In the modern world, there are not too many people who do not know this color. The "snow" effect has been commonly used to describe it, as well as static, haze, and a number of other terms, but the color remains the same. It is the color of frustration, hopelessness and non-clarity, much like Case's world. There is very little hope left in Case's life as Gibson opens the novel, and within fifteen words, the reader is well aware of this fact. Not only does the world continue a bleak existence, but so to do the main characters of the novel. Molly, for example, is a lost assassin. She is not physically lost but rather spiritually as she has turned into a killing machine. The only true way to describe it is cold-blooded. Her icy nature is revealed, once again, through the use of the color gray. Her eyes, or what is left of them, used silver, mirrored lenses. Just by her paratactic description, the reader syntactically knows her faults through her faulty vision. In addition to Molly, one other member of Case's team is flawed using the color gray. This is Armitage, or Corto. Armitage is merely a shell of a man created by an Artificial Intelligence. To indicate the instability of Armitage/Corto, Gibson shows Armitage in a gray business suit, which contrasts starkly to the image the reader sees of Corto's military days, where he would have worn a camouflaged uniform.

Creative writing assignment Essay

To describe myself in three adjectives, one of the words would have to be that Im ambitious. To be ambitious is to be eager and greatly desirous. For example, I play on an ice hockey team and lots, if not all, are all skating drills where its really tiring, but yet, the day before practices, I am always excited and eager to play the next day, where I no that many other players hate going to practices. Another example would be that I make many goals that I always try my best to achieve which most of the time motivate me to try even harder. For example, at the beginning of grade seven, I made a goal to be on the honor roll while being on as many school teams as possible for each of my years at junior high, and I achieved that goal with flying colors. This year, my goal is to make it on the honor roll once again and also to be on the junior volleyball school team, and by making that a goal for me, it makes me try even harder to achieve it. The second word I would use to describe myself would be trustworthy. To be trustworthy is to be reliable and to be worthy of confidence. I use this word to describe myself because I am the kind of person that you can trust with anything from something in words or something material. If someone were to tell me something with confidence that I wouldnt tell another person, that someone wouldnt have to worry because I would never break the trust that that someone puts in me. If someone has enough confidence in me to tell me something or ask me to hold something for him or her, it shows me that they have trust in me, to me, that is a big complement, and if I were to break that trust, I would lose that complement forever. For example, my parents trust me enough to stay home alone from time to time, and the only reason they do is because I havent broken their trust before. The third and final word I would use to describe myself is athletic. Unlike the other adjectives I used, athletic is a word that always pops into my head whenever I am asked to describe myself. Although it isnt as deep as the other two, I felt the need to put it as one of my three adjectives because without it, it just doesnt feel like me. The reason I use this word to describe myself is simple, because I play a lot of sports and I enjoy them more then anything. Ive been athletic about all my life, and I feel it is important for everyone to be physically fit especially while youre young, it  makes u feel better about yourself and even has many long term life saving effects.

American Bureaucracy

Bureaucracy is a form of administration wherein the government is divided into bureaus or different departments which are headed by non-elected officials. This administration is characterized by a highly hierarchal distribution of authority amongst the offices and is guided by rigidly fixed procedures and rules.Max Weber listed characteristics of modern bureaucracies: (1) the functions of the bodies are rigidly fixed by laws; (2) hierarchal and integrated into a chain of command; (3) administrative policies are properly documented; (4) services require apprenticeship; (5) functions entail full devotion to office; and (6) access to this system is also an access to technology, jurisprudence commercial science and administrative science.The development of the American Bureaucracy is an end result of the division of classes into societies, wherein in the function serves to secure the acceptance of such orders. Thus, according to Lefort, bureaucracy is normally viewed as service of a domi nant class within a specific framework to assure preservation of status for most for the dominant class. Moreover, American bureaucracy is seen to have several negative implications on its government form. Citizens are often concerned on the manner at which principles are being attached to certain issues.It is argued that at most times, people face the imminent danger of being placed at a stand wherein the public good is disregarded due to conflicts from rival parties, and that when the rule of justice and rights of minor party have become overpowered by the force of interested and overbearing majority (Madison, 1787). Thus, it is often said that American bureaucracy has encouraged the splitting of administration into factions, which in turn is an effect of unsteadiness and injustices within the system.These injustices are brought by the government’s influential impact on making judgment towards property sentiments, which at large differ based on the social class – whe rein the inequality to acquire property is possible to equate based on social standing (Madison, 1787). Consequently, the manner of representation in the republic is also in question. The process at which a representative or representatives are elected is based on a certain limited number.Hence it will follow that proportionality of the election of officers for certain republic may render them the greater or lesser probability of representation for the emancipation of the republic that they represent (Madison, 1787). On the other hand, there are also positive views attributed in the establishment of American bureaucracy. The establishment of bureaucracy in US has pushed separate departments to become independent and to act according to their own will.This shall also follow that the members of this department will develop their own sense of authority and responsibility over their areas. But nonetheless, the idea of independence for the established departments has remained untrue so f ar. The independence they posses is only minimal and nominal, because the appointments that are taking place within the system and the process by which orders are done, come strictly from the rigidness of orders from higher authorities.Another thing, this kind of system is highly susceptible to biases and administration corruption, since the appointments made are delivered by higher officials and consequently the works to be done should ought to be addressed to the authority who conferred it to them (Madison 1788). Though the distribution of power amongst these departments is done in such a way that each department serves as checks and balance for the other departments, it still occurs that this distribution of authority, instead of being vigilant to the interest of the public, has rather became a cover up for private interest.And this rhetoric of division of powers which aims to distribute powers equally among different departments couldn’t be in any way possible because it is convenient and not rational to create an equal distribution of power to defend each of their own departments. However, the constitution for the American bureaucracy claims two distinct responsibilities that render this kind of administration rational and beneficial to the society. First, in contrast to bureaucracy, a single republic owes concentration of powers towards one entity, which shall serve as the lone guard against power abuse.On the other hand, in a bureaucratic state, the power is divided between two bodies, thus creating a double security against usurpation of powers by officials. Second, this division makes the interests of the republic more guarded in such a way that the first division guards the society against oppression that may be caused by the other division. Therefore, the two separate departments of the government serve as checks and balance between them (Madison 1788). Thus, bureaucracy does not necessarily entail influence on political and economic regime.N either that its organization has relation to power, rather, bureaucracy administers itself by splitting its powers into divergence (Lefort, 2007) Moreover, the current trend of American bureaucracy is being put into test. The organization of new departments has sprung from the current US government administration, all geared towards increasing their security, customs, immigration and emergency management. According to reports, this reorganization in the US government shall become the most ambitious US reorganization since 1947.The formation of the new Department of Homeland Security shall ideally and constitutionally become the guardian of Americans against terrorist attacks, immigration advocates, and business lobbyists. However, this shall also post a great challenge on coping from the changes that it will allow. The problem shall be rooted on the dilemma of balancing old and new traditions in such a way that this will not disrupt the functions that it is ought to serve for the go vernment and the society (Alden, 2002).Bureaucracy has served its purpose in the American government. Though it varies widely between the positive and the negative feedbacks that it has encountered over its practice, bureaucracy has indeed become an institution in the American government administration. Further, it has its process closely tied to the process of capitalist rationalization. It forms a type of social organization and establishes social strata and dictates a relationship among its members. References Alden, Edward. (22 November 2002) A Battle of American Bureaucracy.Financial Times. Retrieved November 15, 2007, from http://www. globalsecurity. org/org/news/2002/021122-secure01. htm Lefort, Claude. What is Bureaucracy? Retrieved November 15, 2007, from http://www. generation-online. org/h/fplefort. htm Madison, James. (1787 November 22) The Utility of the Union as a Safeguard Against Domestic Faction and Insurrection. Daily Advertiser. Madison, James. (1788 February 6) T he Structure of the Government Must Furnish the Proper Checks and Balances Between the Different Departments. Independent Journal.

Free sample - Discussion Board. translation missing

Discussion Board. Discussion BoardComputer Forensics and investigation Computer forensic is the investigation of the computers to carry out different required tasks. It is a wider concept related to the crimes happening in computer which is against the law. This technology enables the experts to have better access to accumulated information, to be more accurate in the identification of victims and it minimizes the wrongful accusations (Judd R. 2004).   The main purpose of using computer forensics in crime investigation is to ensure that the recovered information or data is valid and to ensure that no data is altered so that the original data can be used in the courts of law as evidences. It allows the forensic practitioners in the identification and analyzing of traces in a more objective manner. This method also efficiently searches a very large volume of data, assists in the interpretation of the results and contributes to generation of new knowledge and skills (Franke K.2007). The different forensic tools include PC Inspector File Recovery which is used to reveal information from computer storage media, Encase ® used in disk imaging and analysis of data, the Forensic Tool Kit developed by AccessData which enables the Computer Forensic Specialists to view all the files that are stored in the computer system and FTK Imager which is used in imaging and viewing the storage devices. The computer forensic personnel consist of the professionals who have the relevant certifications based on forensic curricula and competency examinations and who are able to use the modern investigative techniques. These computer forensic specialists investigate crimes which are committed using computers such as wire fraud, identity theft, child pornography homicide and others. They provide assistance to the law enforcement officers in the preparations of search warrants which lead to the seizing of computers. They also assist in collecting and processing evidence at the scenes of crime (Gallegos F. 2005). Conclusion Computer forensics becoming an important field and it requires one to possess well developed technical skills and legal knowledge. Very powerful software tools are used in this field.

Texas Political Culture and Immigration essay part 2Essay Writing Service

Texas Political Culture and Immigration essay part 2Essay Writing Service Texas Political Culture and Immigration essay part 2 Texas Political Culture and Immigration essay part 2Texas Political Culture and Immigration essay part  1Texas immigration policies, especially in regard to undocumented immigrants are strict but not as strict as they are in Arizona, for example. Nevertheless, the impact of the traditionalistic and individualistic political culture on immigration policies is obvious. At this point, it is possible to refer to some legislative bills which were and were not introduced in Texas in 2008 and 2009. The 2008 bill 81 (R) -HB 233 that aimed at the creation of an advisory committee to establish and recommend qualifications for certain health care translators and interpreters passed (Payan, 2013). The 2009 bill 81(R) – HB 266 that regulated the provision of benefits and services to, and the verification of the employment status of, immigrants and to enforcing laws relating to immigrants; providing civil and criminal penalties did not pass (Payan, 2013). Similarly, the 2009 bill 81 (R) HB 4482 that required a lawful presence in the United States for receipt of state educational benefits and to the determination of resident status of students by public institutions of higher education as well as the 2009 bill 81 (R) SB 1677 that regulated immigration assistance services and provided civil and criminal penalties did not pass too (Payan, 2013). Also, it is worth mentioning the 81 (R) SB 2568 concerning the prohibition against the knowing employment of persons not lawfully present in the United States and the suspension of licenses held by certain employers for the knowing employment of those persons, that also did not pass (Payan, 2013) that gives implications that the position of undocumented immigrant employees in Texas may be under a threat since the failure of introducing the aforementioned bill limits opportunity of employment. The aforementioned bills that failed and passed reveal quite strict attitude of legislators and politicians of Texas to the illegal im migration. They do not want to expand rights and opportunities of undocumented immigrants to obtain wider access to education and health care services. In addition, legislators attempt to raise barriers for the access of undocumented immigrants to Texas labor market. At any rate, the bill 81 (R) SB 2568 that did not pass could have enhance employment opportunities of undocumented immigrants  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Today, Texas faces a profound immigration crisis, which ultimate manifestation is the immigrant children crises as illegal immigrant children flood into the state. Illegal immigrant children â€Å"have surrendered themselves to U.S. Customs and Border Protection officers on the belief they will be allowed to stay in the country, and officials have struggled to house the children amid a staggering backlog of immigration cases† (Cohen, et al., 2014, 12). In such a way, in face of the emerging flow of undocumented immigrant children, Texas turns ou t to confront the problem on its own because the federal government has failed to prevent and resolve the crisis, while the state was traditionally oriented on the development of its immigration policies using the federal legislation as the legal framework with a strong use of the Constitutional power of the state to develop its own legislation and enforce its immigration policies.  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Moreover, undocumented immigrants have the limited access to legal services as human rights activists, who have recently attended one of three operating detention centers in Texas, point out. They â€Å"raised concerns that families aren’t being given necessary access to legal services and that conditions are beginning to take a toll on detained children† (Sakuma, 2014, 3). This is another evidence of the inclination of Texas to the traditionalistic and individualistic political culture because Texans view undocumented immigrants as violators of th e existing legal norms and, more important, as a threat to the existing social order because they misbalance the state labor market, education and health care system, requiring wider support which is provided for them from the part of the federal government, especially in the field of education and health care services.Instead, the local authorities attempt to raise barriers on the way of immigrant to Texas, although those barriers are not as strict as is the case of Arizona, for example. The Senator Comyn in a collaboration with the Representative Cuellar have a plan to introduce legislation Thursday to repeal the 2008 deportation hearing law, but the introduction of the law may limit consistently the access of illegal immigrant children to the US and, therefore, Texas, on the pretext of protections for children who come to the United States because of concerns about drug or sex trafficking (Cohen, et al., 2014). This proposition implies the tightening immigrant legislation that wi ll prevent undocumented immigrant children of the wider legal protection of their rights.  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   At the same time, the development of Texas political culture raises the problem of conflict between different trends or political cultures. In this regard, the policy concerning immigration reveals the full extent to which political cultures in Texas come into clashes.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Moreover, the position of political leaders of Texas is likely to become even stricter in regard to immigration policies, as â€Å"Patrick- and like-minded new state GOP leaders like Senator Ted Cruz- are steering Texas Republicans sharply rightward on immigration issues† (Brownstein, 2014, 2). Moreover, â€Å"Patrick ousted incumbent Lt. Gov. David Dewhurst in a GOP primary this year, mostly behind promises to toughen enforcement at the Mexican border and to repeal the policy of providing in-state public college tuition to young people brought to th e U.S. illegally- a plan that the outgoing Gov. Perry signed and still defends† (Brownstein, 2014, 2). In fact, such a situation in the political life of Texas and preferences of local voters show that politicians standing on the traditionalistic and individualistic ground are still very popular in Texas and can gain the wide support due to the prevalence of the traditionalistic and individualistic culture in Texas.  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   At the same time, as Texan politicians enter the federal politics they extrapolate their political culture on their policies at the federal level.   However, at the federal level, political culture is more diverse and the opposition from the part of other political cultures, which remain under-represented in Texas, is very strong. As a result, politicians from Texas are often perceived as highly conservative in the federal politics. At the same time, Texas politicians do not accept political cultures different from thei r own that leads to conflicts and tension between politicians at the federal level.ConclusionThus, I have shown Texas is a state with a strong traditionalistic and individualistic political culture. The state provides extensive support for the conservative Republican Party and the Presidential election returns within the last thirty years have proved this fact clearly. In addition, current immigration policies and legal initiatives also show that the state government’s   and legislators attempts to protect the traditional lifestyle and individual initiative of the state population and raise barriers on the way to the illegal immigration by preventing the access of undocumented immigrants to the state, to the local labor market and limiting their opportunities to access education and health care services in Texas. In such a way, Texas political culture is different from some of other states in the US. At the same time, Texas political culture has a strong impact on the feder al politics because Texas politicians represent the conservative part of the US society and personify traditional American values. As a result, they often come into clashes with more liberal politicians from other states, when they operate at the federal level, where they attempt to implement the same principles of political culture they used to implement in Texas.

Gallium Spoon Tricks

Gallium Spoon Tricks Gallium is a shiny metal with one property in particular that makes it perfect for science tricks. This element melts just above room temperature (around 30Â °C or 86Â °F), so you can melt it in the palm of your hand, between your fingers, or in a cup of hot water. A classic set-up for gallium tricks is to make or purchase a spoon made from pure gallium. The metal has about the same weight and appearance as stainless steel, plus once you melt the spoon, you can reshape the gallium to use it again and again. Gallium Spoon Materials You need either gallium and a spoon mold or else a gallium spoon. Its a bit more expensive, but if you get the mold, you can make a spoon over and over. Otherwise, youll need to mold the metal by hand to re-use it as a spoon. The Mind-Bending Gallium Spoon Trick This is a classic magician trick in which the trickster rests a gallium spoon on a finger or else rubs it between two fingers, appears to concentrate, and bends the spoon with the power of his mind. Youve got a couple of ways to pull off this trick: Rest the spoon on a finger that you warmed up right before the trick. Easy ways to warm your hand are to hold a cup of hot tea or coffee or simply put your hand under your armpit briefly.Rub a section of the spoon between two fingers. Friction generates heat, which will soften the spoon. The weight of the spoon will cause it to bend. The Disappearing Spoon Trick If you stir a warm or hot cup of liquid with a gallium spoon, the metal melts almost immediately. The spoon disappears into a cup of dark liquid or pools visibly at the bottom of a cup of clear liquid. It behaves much like mercury (a metal that is liquid at room temperature), but gallium is safe to handle. I dont recommend drinking the liquid, though. Gallium isnt particularly toxic, but its not edible.

Autobiography Essay Example | Topics and Well Written Essays - 750 words

Autobiography - Essay Example After witnessing my grandmother’s near-death experience and her recovery to normal life, I knew that the human body fascinated me. I wanted to be the oncologist who helped get my grandmother’s health back on track. I wanted to help bring back smiles to people’s faces through influencing their health conditions. My clinical shadowing and research experience has helped affirm my dream of becoming a doctor. This experience has assisted me in learning how tender and caring one should be towards patients. I have learned that devotion is key to becoming successful in the medical profession. I have learned to experience the joy one gets at seeing patients recover. The experience further widened my eyes on how detailed the human body is, and how perfectly careful one has to be when dealing with it. I got to be part of two research activities through this experience; a clinical and laboratory research. Forming part of the clinical research helped me to gain two mentors wh o were the two head doctors of the research. They guided me on the road they undertook towards achieving their work as doctors. The clinical research further enlightened me on the effort, dedication, and the love that a team of doctors put towards assisting a community. The clinical research also helped me to consolidate my academic goals. I became interested in attaining a master in public health during the gap year after medical school. The laboratory research experience helped me to understand how to follow specific protocols.

People Resourcing and Reward Essay Example | Topics and Well Written Essays - 4500 words

People Resourcing and Reward - Essay Example In turn, effective planning can serve as a potent remedy some of the most pressing problems faced by companies. According to Kohl (n. d.), human resource planning in indispensable as it "serves to stabilize employment levels when demand for a firm's product is variable." In this case this tool becomes important in "reducing the firm's unemployment compensation liability costs due to layoffs, providing more job security to the firm's employees, and minimizing the costs of overtime during periods of peak demand." This highlights the company's ability to source the needed workforce only when they are required. This is done by hiring temporary employees in order to fill up positions during peak seasons. Human resource planning also addresses the company's problem in employee turnover. This tool prevents young college recruits from leaving the business organization after it has spent on expensive training programs primarily because of the lack opportunities for promotion. As human resource planning uses techniques in order to forecast the future organizational needs of the company, training and skill enhancement programs will only be extended when they are deemed necessary in the future. This then also "reduces the problems of managerial succession by permitting plans for replacements to be drawn up in advance in case key executives resign or die" (Kohl n.d.). In the end, human resource planning also helps in enhancing the financial performance of the company by increasing its profits. It makes possible the allocation of financial resources so that departments will have the necessary people to produce the firm's desired output. Human resource planning is seen as tool which is utilized in maximizing the resources of business organization by assigning each of the members of the workforce to the task or assignments where he or she can function more efficiently. Through this, the skills and knowledge of the human resource is utilized to the areas where they are most needed. However, aside from the perceived advantages of human resource planning, it also has its own set of critiques. Firstly, the effectiveness of the tool is directly linked with the business organizations ability to forecast of human resource needs in the future. Failure to exactly estimate the human resource needs will make human resource planning only a waste of time because the company may still face shortages or surpluses of resources. The hardship of effective forecasting technique is even aggravated by the rapidly changing global markets which make it impossible for companies to predict the future of their operations. Kohl (n.d.) also adds the "inherent mathematical complexity associated to model human resource systems." Until now,

Environmental Audit Term Paper Example | Topics and Well Written Essays - 2000 words

Environmental Audit - Term Paper Example Environmental auditing is systematic process conducted at regular interval by responsible authority in order to identify operations and practices related to meet environmental requirement. When conducting the environmental auditing, the firm should frame certain criteria for conducting the audit. Effective criteria would enable the firm to assess the performance of auditing entity. If these criteria are inappropriate it will bring certain problems in making the auditing. The framed criteria should be measurable, acceptable, and should be reliable. The organization should make good planning regarding the conduct of environmental audit. This planning would help the firm to know the required time to complete the auditing procedures and to identify potential problems in the audit etc. â€Å"For planning for successful audit assignments, the auditor needs to understand the auditees’ commitments in terms of financial norms, compliance requirements, and performance expectations. Thi s would determine what procedure is to be followed† (Guidance on Conducting Environmental Audit 9). If a firm proposed to conduct environmental audit, it should have clear objective about the auditing, and the firm should determine the steps to be undertaken by the firm to achieve the desired result. The firm should determine the audit scope, areas of auditing etc. The audit objectives includes the following†¢Ã‚  To recognize improvement opportunities.†¢Ã‚  To assess the internal policies for conducting environmental audit.... Environmental audit generally conduct in the following areas Material management and savings of material. Waste management and effective disposal of waste. Economy use of water resources. Effective utilization of energy resources. Performance pertaining with the environmental management system. Air pollution and preparedness to prevent air pollution. Noise pollutions control and preparedness. Conducting environmental auditing is the responsibility of companies, and it is their duty to keep environment free from the pollutions. The companies should evaluate their commitment toward society and they should not make any harm to the environment. Companies should utilize the natural resources in right manner and it should not exploit. Today government has imposed many regulations on the companies to protect the environment from the pollutions. â€Å"Through adoption of clean technologies and improvement in management practices for prevention and control of pollution is not only mandatory but also has got wide acceptance among the industrial community. Charter on corporate responsibility for environmental protection (CREP) also calls for commitment and voluntary initiatives of industry for responsible care of the environment† (Environmental Auditing 1). Environmental auditing reviews company’s operations and process in order to assess company’s compliance with environmental rules and regulations. Environmental auditing cover broad areas of business including building and building site. Many companies are using environmental auditing as a valuable tool of business resources. The auditing helps the company to bring many advantageous such as to know the problems relating to air, water, and land and to gain

Stakeholder Theory Essay Example | Topics and Well Written Essays - 500 words

Stakeholder Theory - Essay Example Stakeholders include shareholders, employees, suppliers, customers, and the communities in which the firm operates-a collection that Freeman terms the "big five." The very purpose of the firm, according to this view, is to serve and coordinate the interests of its various stakeholders. It is the moral obligation of the firm's managers to strike an appropriate balance among the five interests in directing the activities of the firm. This understanding of the firm's purpose and its management's obligations diverges sharply from the understanding advanced in the shareholder theory of the firm. According to shareholder theorists such as Nobel laureate economist Milton Friedman, managers ought to serve the interests of the firm's owners, the shareholders. Social obligations of the firm are limited to making good on contracts, obeying the law, and adhering to ordinary moral expectations. In short, obligations to nonshareholders stand as side constraints on the pursuit of shareholder interests. This is the view that informs American corporate law and that Friedman defends in his 1970 New York Times Magazine essay, "The Social Responsibility of Business Is to Increase Its Profits." (Thomas. J. Donaldson, 1994) Stakeholder theory seeks to overthrow the shareholder orientation of the firm.

Obesity epedemic in america Essay Example | Topics and Well Written Essays - 1000 words

Obesity epedemic in america - Essay Example The good part of this issue is that it can be dealt with and controlled. Increased awareness programs by the government along with better management skills and promotion of healthy programs by the media which support a healthy lifestyle can prove to be very beneficial for the people suffering from this condition. Understanding the causes of the disease and dealing with the issue by analyzing these causes can assist in treating this condition. Obesity Epidemic In America With the changes in the living styles of human beings many pathological conditions have emerged and they have become matters of global concern owing to the wide range of impact that they lay on the health of the individuals. Obesity is one such example of a global pathological problem which is now a subject of much concern. Obesity is basically a condition in which there is an increase in the amount of fats in the body of an individual. This condition serves as a base for many degenerative diseases and it serves to af fect the most important systems of the human body. It has now also been observed that this condition also lays an impact on the psychological condition of the person (Stanford Hospital and Clinics 2010). The great number of risks and problems associated with the condition have made it a topic of concern for the entire world. The alarming levels of the condition in the United States have served it to be labelled as an epidemic. ... Examination Survey, two third of the people who reside in the United States either suffer from increased weight or obesity with on an average of one third of the population suffering from obesity (Weight Control and Information Network 2010). Another very important finding in the country explores the fact that the vulnerability of the children becoming obese has also increased and the in the last three decades the rate of this condition has increased by more than thrice in the country. The intensity of the issue of childhood obesity can be analyzed by the fact that the issue has come to the notice of the first family and even they have called for efforts to fight against obesity (Laing 2010). Obesity is a disease state which was initially considered to have no genetic role in its causation. But recent research has put forward the fact that obesity is a disease state which has both genetic component and environmental factors involved in causing it. It is caused by the deletion or dama ge in a gene known as Ob gene putting the subjects with these deletions at high risks of developing obesity (NCBI 1998). The disease can also occur because of an energy imbalance that is excessive intake of energy with lesser utilization by means of physical activity. Thus the increases energy is stored in the body in the form of fat leading to obesity. A diet rich in fat can also lead to obesity because a high fat diet stimulates a person to eat more. Another important reason for obesity is psychological disorders which include depression, eating disorders like binge eating and increased diet in times of stress. Obesity itself can also serve as a reason because it might lead for a person to lose his self confidence and hence the person loses the will to exercise and adopt weight loss

Management case study Essay Example | Topics and Well Written Essays - 500 words - 1

Management case study - Essay Example Generally speaking, some team members accept a higher level of responsibility and turn out superior performance compared to their colleagues. This happens as a result of their inner drive, leadership qualities and training. A team leader has the envious task of recognizing such individuals and encouraging them on the one hand, and persuading the others to lift their performance to match with the formers. In the given case, my team has turned in a good performance for which the higher management has decided on a uniform reward for all members of my team and assigned me the task of announcing it. To communicate the decision, I would call for a meeting of my full team and start the proceedings by congratulating the entire team for their team work that made us to achieve the goal of new product offering successfully. I would then make a special mention of the fact that some of them were with the team practically from the inception and / or had put in extra efforts to lift the project off the ground to give it an actionable shape, overcoming challenges and that they deserve a special mention and cheers. I would announce their names. By this process, I would make a public recognition of the superior performers, which in itself is an incentive. I would follow this with a statement that in the ultimate analysis, success would not have been so complete had it not been for the enthusiasm and cooperation of all members of the team. I would encourage the team to follow the lead given by the superior performers, to emerge as future leaders for whom rewards and recognitions await in times to come. I would conclude the meeting by confirming that the Executive Management was pleased with the team performance and decided to award extra two days off for each member of the team for the next

Obesity epedemic in america Essay Example | Topics and Well Written Essays - 1000 words

Obesity epedemic in america - Essay Example The good part of this issue is that it can be dealt with and controlled. Increased awareness programs by the government along with better management skills and promotion of healthy programs by the media which support a healthy lifestyle can prove to be very beneficial for the people suffering from this condition. Understanding the causes of the disease and dealing with the issue by analyzing these causes can assist in treating this condition. Obesity Epidemic In America With the changes in the living styles of human beings many pathological conditions have emerged and they have become matters of global concern owing to the wide range of impact that they lay on the health of the individuals. Obesity is one such example of a global pathological problem which is now a subject of much concern. Obesity is basically a condition in which there is an increase in the amount of fats in the body of an individual. This condition serves as a base for many degenerative diseases and it serves to af fect the most important systems of the human body. It has now also been observed that this condition also lays an impact on the psychological condition of the person (Stanford Hospital and Clinics 2010). The great number of risks and problems associated with the condition have made it a topic of concern for the entire world. The alarming levels of the condition in the United States have served it to be labelled as an epidemic. ... Examination Survey, two third of the people who reside in the United States either suffer from increased weight or obesity with on an average of one third of the population suffering from obesity (Weight Control and Information Network 2010). Another very important finding in the country explores the fact that the vulnerability of the children becoming obese has also increased and the in the last three decades the rate of this condition has increased by more than thrice in the country. The intensity of the issue of childhood obesity can be analyzed by the fact that the issue has come to the notice of the first family and even they have called for efforts to fight against obesity (Laing 2010). Obesity is a disease state which was initially considered to have no genetic role in its causation. But recent research has put forward the fact that obesity is a disease state which has both genetic component and environmental factors involved in causing it. It is caused by the deletion or dama ge in a gene known as Ob gene putting the subjects with these deletions at high risks of developing obesity (NCBI 1998). The disease can also occur because of an energy imbalance that is excessive intake of energy with lesser utilization by means of physical activity. Thus the increases energy is stored in the body in the form of fat leading to obesity. A diet rich in fat can also lead to obesity because a high fat diet stimulates a person to eat more. Another important reason for obesity is psychological disorders which include depression, eating disorders like binge eating and increased diet in times of stress. Obesity itself can also serve as a reason because it might lead for a person to lose his self confidence and hence the person loses the will to exercise and adopt weight loss

Impact of Technology on the Work-Life Balance Essay Example for Free

Impact of Technology on the Work-Life Balance Essay Technology has done a lot for human beings. Without the development in technology it is possible that the pyramids would never have been built and neither would we be able to communicate with each other from remote places all over the world. Some say that these technological advances such as the internet and cellular phones are a boon on society and humankind yet there are also those detractors who say that it is has not simplified life in so much as it has complicated matters. While we enjoy everything that technology has to offer, it cannot be argued that there are times that we are more inconvenienced by it. There are times when one would rather turn his or her cellular phone off so that they can relax more and take it easy. There are also times when they wish they had battery power on their technological devices so that they can work more or accomplish more. The problem it seems is that as technology becomes more advanced and incorporates itself more in the daily lives of people it becomes more difficult to escape from it. The biggest difficulty nowadays is actually turning that piece of technology off without fearing that doing so will leave a person uninformed or make him feel so isolated and left out of this world which is moving at a very rapid pace. It is commonplace to see a person check his computer (either desktop or laptop) every few minutes or so just to make sure that they read the email as soon as it comes in. People bring their work with them almost everywhere they go these days. Work is no longer limited to the confines of a cubicle or an office but can now be performed virtually anywhere thanks to the technological advances that have enabled the invention of portable workstations such as blackberries, laptops and cellular phones. The introduction of teleconferencing has made travel to meetings all but obsolete and the push for more digital convergence has made it possible for people to work from their homes. The proper characterization of this phenomenon is not increasing worker productivity, as it is claimed, but rather invasion of privacy. There is no longer any place that is safe from the summons from work or the orders of a superior. Virtually every place on this planet allows people to perform work at any time and from any location. This means that since the day has still remained at 24 hours, unless scientists have found a way to alter that, and the more that time is devoted to work, the less time on that 24 hour clock is left for privacy and relaxation. Even certain studies have shown that the work hours have dramatically increased from the levels that it was at previously. More and more people put in longer hours with each technological breakthrough that is introduced. It has been argued that this is a good thing because people make more money and more money means happier people. While there is no arguing the fact that more money does make people happy, in general, the devices that have been invented to allow the generation of higher incomes has also reduced the time left to spend that hard earned money. The extra income that is generated by these devices now seems so meaningless and useless since it cannot be spent due to the lack of time to do so. Another problem is also the cost of worker burn out. While productivity is theoretically increased per worker, the added stress and workload that is given per worker leads to a faster deterioration of the human resource and means that in the long run the potential productivity gains are actually nullified by the deterioration of human capital. All of these time saving devices which claim to increase productivity were invented for a simple reason, to decrease work time. They were not really invented to free time up for other work but were envisioned to allow a person to do more with less. We should learn to keep it that way, be happy with doing more with less and do not fret about doing more with more.

Quality Assurance Systems in the Hotel Industry

Quality Assurance Systems in the Hotel Industry Quality assurance systems in the upscale hotel sector 1.  Introduction Quality assurance systems are an important element of any business strategy. As Porter (1985 and 2004) suggests, quality is now seen as a major force for gaining competitive advantage, particularly with the consumer. There is no commercial activity where this is more important than in the hotel sector. As Yavas et al (1995) state, â€Å"the question is no longer whether to have quality assurance programmes, but rather how to make these programmes work,† within this sector of hospitality. It can be argued that in terms of quality assurance systems delivery the hotel sector is in a distinctive position, particularly when it is related to service satisfaction (Parasuraman 1997, Schiffman and Kanuk 2000). Unlike most other industries, where customer contact and engagement during a visit might be fleeting, as happens in retail shop environment, a hotel’s interaction with customers can last from a few hours to several days. Furthermore, as Kandampully et al (2001, p.28) the quality of the hotel product also has to take into account the â€Å"customer-to-customer interactions.† Following a brief literature review, the intention of this essay is to examine quality assurance systems and evaluate the effect that these systems have upon service quality and customer satisfaction within the upscale Hotel market. 2.  Literature Review Quality assurance and management within the hotel environment is focused upon satisfying the customer. Therefore, this review concentrates on the existing literature relating to customer satisfaction and the various methods and frameworks of service quality related to this focus. 2.1  Customer satisfaction Academic literature relating to customer satisfaction falls within two main categories, these being the psychological perceptions of the customer and the practical ways in which customer satisfaction can be implemented to help a business achieve its objectives. In the hotel sector, this objective is â€Å"to try and engender a high level of customer satisfaction in order to positively influence our customers repurchasing and communicative behaviour† (Hennig-Thurau and Hassen (2000, p.62). However, to achieve this aim the business has to understand what drives customer satisfaction. Christopher (1984), Holbrook (1999), Schiffmand and Kanuk 2000 and Brennen (2003) all agree that satisfaction is related to the consumer’s perception or judgement of a product experience and value when set against their expectations and the payment made. Zeithaml’s (1998, p.14) describes it as follows, being that â€Å"Perceived value is the consumer’s overall assessment of the utility of a product based on perceptions of what is received and what is given †¦ value represents a trade-off of the salient give and get components,† in other words the cost paid is measured against the value expected . Therefore, it can be suggested that the greater the service quality the higher the satisfaction (Kandampully et al. 2001, p.8) and, conversely, the higher the price the greater the perception of value. Bostepe (2007) further identifies that, within a service environment such as a hotel, consumer satisfaction does not simply rely upon the quality of service satisfaction received from business employees, although this is an essential element. The physical environment, for example the dà ©cor, bedrooms and other facilities offered, are also elements of the consumer’s perceived value and service satisfaction. If any of these are deemed as sub-standard, particularly when related to the price paid, this will reduce the customer’s enjoyment and levels of satisfaction. It follows therefore that only by concentration upon providing quality within all of these areas of the product will the business be able to assure satisfaction and encourage customer loyalty (Holbrook 1999, p.121), which Porter (1998), Parasuraman (1997) Agrawal (2000) and Harrison (2003) all agree is essential to competitive advantage. 2.2  Methods used to measure customer satisfaction and service quality There are numerous â€Å"quality assurance† measurement systems and standards available for use within the business environment. Customer feedback is one such measurement. Client feedback can be achieved by two methods. The first way is to provide questionnaires that hotel guests are asked to complete before the end of their stay. The second is to rely upon externally conducted questionnaires, interviews and polls, which can be conducted on a continuous basis. However, whilst comments and responses provided by customers may act as a good testimonial for the business (Porter 1998, p.1478), these systems have their drawbacks. In addition to the fact that not all customers might respond, the design of the process itself is often flawed (Kandampully et al 2001) and can therefore be misinterpreted. For example, a simple complaints procedure would not necessarily identify areas of quality success. Secondly, these feedback processes tend to lack definition. Their use may therefore be inhibited by the fact that they do not provide management with sufficient detail to be able to locate and resolve the specific areas of the business where deficiency of service quality is occurring. Furthermore, a system of continuous surveys adds to the business administration costs and, in addition, raises the inherent issue of sampling (Visit Britain 2008 b). Evidence of these limitations can be seen in a recent survey conducted by Visit Britain (2008 a) (see figu re 1). Whilst it is clearly apparent from these results that customer satisfaction in related to encouraging loyalty and retention, as well as being inherently useful in turning existing customers into promotional tools for the hotel, this does not provide management with a detailed analysis of the areas where satisfaction has been achieved or denote what areas were not satisfying. To provide detailed quality service observations therefore, a more robust quality assurance system is required and most of these are based upon variations of the â€Å"Total Quality Management† (TQM) system (Dotchin and Oakland 1994 and Ziethaml et al 2000). These methods are designed to assess and monitor the level of quality being maintained throughout all areas of the business process and its supply chain, from an internal as well as external viewpoint. One such variation, particularly applicable to the hotel industry, is the SERVQUAL method, which originated from the works of Parasuraman et al (1991). 3  SERVQUAL Measurement Kandampully et al (2001, p.68) observe that many academics and practical studies have used SERVQUAL as a â€Å"true measure of customer service† and that it has been â€Å"extensively applied† (Shahin 2005, p.4) in service based organisations. Amongst these service industries will be included the hospitality and hotel sector of the tourism industry. Despite the fact that recent researches have sought to extend the elements of quality measurement with the SERVQUAL model, fundamentally it is still based upon the level of quality assurance to be measured and gained within five key sectors of the business processes, which are: Tangibles Physical facilities, equipment and appearance of personnel. Reliability Ability to perform the promised service dependably and accurately. Responsiveness Willingness to help customers and provide prompt service. Assurance (including competence, courtesy, credibility and security). Knowledge and courtesy of employees and their ability to inspire trust and confidence. Empathy (including access, communication, understanding the customer). Caring and individualized attention that the firm provides to its customers. Source: Sahney et al 2004 The SERVQUAL measurement can be used internally, through measurement against preset quality assurance standards such as the ISO 9001 Quality certification process (BSI 2008) and the â€Å"Star Rating system† operated by Visit Britain (2008) in conjunction with the Automobile Association. In this case the hotel services and processes are measured against pre-determined sets of quality criterion and monitored at least annually by those who regulate these standards. The internal quality assurance programme is also complemented by external consumer questionnaires and interview surveys. The SERVQUAL quality assurance method has been in existence for some years and is â€Å"tried and tested† (Shahin 2005, p.5), making it a firm favourite within the hotel service industry, where managers are comfortable and confident with the outcomes of these measurements. An element of SERVQUAL that is considered particularly important in this respect is the fact that the system and its measurements are monitored and updated on a regular basis (Holbrook (1999), Sahney et al (2004) and Boztepe (2007)), for example annually (Shahin 2005, p.6). Both ISO 9001 and the â€Å"Star Rating† systems conform to these determinants. 4  Quality assurance in Upscale Hotels As will be seen from the following analysis, the â€Å"quality assurance† systems applied to the hotel in terms of both the internal industry â€Å"Star Rating† and external SERVQUAL systems are virtually synonymous in terms of the standards and factors they rely upon for measurement. To maintain their perception as upscale or â€Å"5 star† hotels, in each of these cases the hotel will have to achieve much higher levels of standards. 4.1  Star Rating system Although the Star Rating system is formatted in a slightly different way to SERVQUAL, the quality elements of this process are still graded in a similar manner. The main difference is the fact that there are minimum quality requirements before the hotel will even be considered for a rating. However, even these equate to the tangible element of the SERVQUAL system (figure 2). Once the minimum entry requirements have been met, to assess which star level is applicable to the establishment independent inspectors will monitor five quality bands and award a quality percentage to each. These percentages determine what rating the establishment has achieved (figure 3). Figure 3 Quality bands for star rating Source: Visit Britain (2005, p.6) Furthermore, this standard of quality has to be achieved across a range of five product elements, which include cleanliness, service, food quality, bedrooms and bathrooms. Simply complying in one of the areas is not sufficient to earn the highest star. Therefore, if the hotel fails to achieve the required 85-100% standards during an annual monitoring it risks its rating being downgraded to four stars or a lower standard. For instance, in the example shown below (figure 4), despite the fact that the hotel being monitored has achieved the five star requirements in three of the five bands, its failures in the other two would demote it to a four star hotel. Figure 4 Quality bank achievement Source: adapted from Visit Britain (2005, p.7) 4.2  SERVQUAL system When using the SERVQUAL system, which is largely based largely upon the results of customer satisfaction surveys, although all hotels would be looking to achieve the maximum â€Å"service quality† satisfaction level of 100% in terms of the overall scoring, there is a significant difference in the way this would be achieved when related to the different standard of establishments. To provide an example of how this equates in practice, the following is a comparison between the SERVQUAL requirements of a 5 star hotel against lower rated hotel, such as the budget Travelodge hotel chain (figure 5). Figure 5 SERVQUAL comparisons It is apparent from the above comparison that the 5-star establishment requires their quality of service to be more balanced, in other words no one area of their product should be delivering a lower quality of service than any other. However, with the budget chain, which operates on a low cost strategy that eliminates much of the human resources and food elements, these specific areas are shown to have less importance to the business, but need to be compensated by increased levels of satisfaction in other areas of quality if the business is to remain successful. 4.3 Findings What is immediately apparent from the analysis of the two quality assurance systems identified above as being used within the hotel sector is their compatibility. This not only applies to the systems per se, but also to the measurement of the results. In both cases an upscale hotel would need to achieve a balanced score with high ratings in all of the quality determinants if it is to maintain its market position and be perceived by the potential customer as a quality (5 star) hotel. Conversely, the lower quality hotels pay less attention to those areas of the standards that are more directly related to the quality of service provided by their human resources, relying instead upon other elements to satisfy customer quality perception, such as low cost (Porter 2004). Whilst it could therefore be stated in simple terms that quality assurance is related to the price being paid for the product, what research such as that conducted by Shahin (2006), Ziethaml et al (1990) and Holbrook (1999), and the fact that all hotels, irrespective of their standards, operate quality assurance systems, shows is that price is simply one element required to fulfill customer satisfaction needs. Whatever price is being charged for the hotel product the customer will still weigh the experience received against the value they expect from the product enjoyed at that price (Zeithaml 1988 and Parasuraman et at 1994). A customer who decides to spend a greater amount of his or her disposable income on arranging to stay in a 5-star hotel will have a much greater value expectation than one who chooses a budget hotel stay. The former will expect the service quality to exist in all aspects of the hotel product. This includes the dà ©cor and the ambiance of the environment, the facilities that are being offered, including meals and room service, and the performance of the hotel’s human resources. If these quality expectations are not met that customer will perceive that they have not received value for money and therefore will view the experience as less than satisfactory. Therefore, they will be unlikely to promote the hotel in a positive manner to others or re-use it. 5  Conclusion It is apparent that in the case of an upscale or5-star hotel the combination of the industry â€Å"Star Rating† and â€Å"SERVQUAL† quality assurance systems will have a significant impact upon their service quality and the level of customer satisfaction achieved from using the product. In terms of the â€Å"Star Rating† system, the higher the star rating the greater the expectation of the customer in terms of their perception of the quality that will be found in this establishment. Therefore, the five star establishments are likely to attract customers who wish to avail themselves of the higher quality experience. With regard to the external â€Å"SERVQUAL† system of measurement, because these are results from customer experiences, the greater the levels of quality achieved in the areas measured, the more likely it is that customers will be retained and act as recommenders to other potential customers. In both cases therefore, it can be concluded that the quality assurance system is designed to achieve competitive advantage by attracting additional market share, thus improving the hotel’s revenue and profitability levels. References Agrawal (2000). Managing service industries in the new millennium: Evidence is everything. Paper presented at the AIMS Convention on Service Management Berry L L and Parasuraman, A (1991). Marketing Services: Competing Through Quality, Free Press. New York, US Boztepe, Suzan (2007). User Value: Competing theories and models. International Journal of Design, Vol. 1, Issue. 2, pp.55-63. Brennan, Ross (2003). Value in Marketing: Confusion or Illumination? Available from: http://mubs.mdx.ac.uk/Research/Discussion_Papers/Marketing/dpap%20marketing%20no25.pdf (Accessed 22 December 2008) BSI (2008). ISO 9001Quality. Available from: http://www.bsi-global.com/en/Assessment-and-certification-services/management-systems/Standards-and-Schemes/ISO-9001/ (Accessed 22 December 2008) Chetwynd, Catherine and Knight, Jenny (2007). Time to capitalise on falling hotel occupancy. The Times. London, UK. Christopher, M. (1996). From brand values to customer value. Journal of Marketing Practice: Applied Marketing Science, Vol. 2, Issue.2, pp.55-66. Dotchin, J.A and Oakland, J.S (1994). Total Quality Management in Services: Part 3: Distinguishing perceptions of Service Quality. International Journal of Quality reliability Management, Vol. 11, Issue. 4, pp.6-28 Gale, B. T. (1994). Managing customer value. Free Press. New York, US. Harrison, Jeffrey S (2003). Strategic Management: Of Resources and Relationship. John Wiley Sons Inc. New York, US. Hennig-Thurau, Thorsten and Hansen, Ursula (eds) (2000). Relationship Marketing: Gaining Competitive Advantage Through Customer Satisfaction and Customer Retention. Springer-Verlag Berlin Heidleberg. New York, US. Holbrook, M. B. (Ed.). (1999). Consumer value: A framework for analysis and research. Routledge. New York, US. Kandampully, Jay., Mox, Connie and Sparks, Beverley (2001). Service Quality Management in Hospitality, Tourism and Leisure. Haworth Press. New York, US. Kotler P (1999). Marketing Management: Analysis, Planning, Implementation, and Control (Millennium ed.) Englewood Cliffs, N J; Prentice-Hall, 279-317. Parasuraman, A. (1997). Reflections on gaining competitive advantage through customer value. Academy of Marketing Science, 25(2), 154-161. Parasuraman, A., Zeithaml, V.A. and Berry, L.L. (1991), Refinement and reassessment of the SERVQUAL scale. Journal of Retailing, Vol. 67, pp. 420-450. Parasuraman, A., Zeithaml, V.A. and Berry, L.L. (1993), Research note: more on improving service quality measurement, Journal of Retailing, Vol. 69, No. 1, pp. 140-147. Parasuraman, A., Zeithaml, V.A. and Berry, L.L. (1994), Reassessment of expectations as a comparison standard in measuring service quality: implications for future research, Journal of Marketing, Vol. 58, pp. 111-124. Porter, M. E. (1998). Competitive advantage: Creating and sustaining superior performance. Free Press. New York, US Porter, M.E (2004). Competitive Advantage. Techniques for Analysing Industries and Competitors. Free Press. New York, US Sahney, S., Banwet, D.K., and Karunes, S. (2004), A SERVQUAL and QFD approach to total quality education: A student perspective, International Journal of Productivity and Performance Management, Vol.53, No.2, pp. 143-166. Schiffman, L g and L L Kanuk (2000). Consumer Behaviour. FT Prentice Hall, New Jersey, US. Shahin, Dr. Arash (2005). SERVQUAL and Models of Service Quality Gaps: A Framework for Determining and Prioritizing Critical Factors in Delivering Quality Systems. Available: Visit Britain (2008 a). UK Market Profile 2007. Available from: http://www.tourismtrade.org.uk/Images/UK_DMarketing_tcm12-22850.pdf (Accessed 21 December 2008) Visit Britain (2008 b). Britain Inbound: Overall Market Profile. Available from: http://www.tourismtrade.org.uk/Images/InboundFINAL_2008_%20BritInbound3F_tcm12-40935.pdf (Accessed 21 December 2008) Visit London (2005). Hotel Accommodation; Quality Standards. Available from: http://www.qualityintourism.com/content/pdfs/Standards/Hotel%20Standard%20INT.pdf (Accessed 21 December 2008) Yavas, U., Yasin, M and Wafa, m (1995). Front and back-stage strategies in service delivery in the hospitality industry: a conceptual framework. Market Intelligence Planning. Vol. 13, Issue, 11, pp.22-26 Zeithaml, V. A. (1988). Consumer perceptions of price, quality, and value: A means-end model and synthesis of evidence. Journal of Marketin,, Vol. 52, Issue. 3, pp.2-22 Zeithaml, V.A., Parasuraman, A. and Berry, L.L. (1990), Delivering quality service; Balancing customer perceptions and expectations. The Free Press, New York, NY.

Should Section 28 Be Repealed? :: essays research papers

Recently, I noticed a petition in my local church that was to be sent to Donald Dewar opposing the repeal of section 28, which bans the promotion of homosexuality in schools. Many people did not want their children and grandchildren to know anything about homosexuality. This made me think, should homosexuality be taught in Scottish schools? The response to section 28 has been very different in different parts of the country. Section 28 has never been used in court to stop a local authority doing anything. Although some local authorities have gone ahead and produced documents in partnership with organisations such as Stonewall youth project to support young lesbian, gay, bisexual and transgender pupils, others have taken the opposite view. Perth and Kinross council refused to give a grant to Dundee Lesbian, Gay and Bisexual Switchboard, specifically citing section 28 as a reason for not giving a grant. Authorities' responses have been different because section 28 is badly worded and, legally, does not mean anything at all; its only effect is to act as a disincentive. Section 28 does not directly affect schools or teachers, just local authorities. Nevertheless, according to the "Playing it Safe" survey by the University of London, 56% of teachers surveyed said that they felt that section 28 prevented them from g iving such good advice and support to young lesbian, gay and bisexual pupils as they might otherwise be able to give. Young LGBT people do not have equal opportunities in education at the moment, neither in schools nor in college environments. The biggest single problem for young people, if you ask them, is that of bullying and harassment. It is something that affects LGBT pupils directly, but other people too. Anybody can be homophobically bullied - they do not have to be gay to be a victim of that. Bullying and harassment also affects people who have not come out as being gay. The effect on someone who has not come out in an environment where homophobic bullying is going on all the time is to make him or her terrified about telling anyone that they are gay. One of the particular LGBT equality issues most often mentioned is an understanding of the importance of coming out. Coming out is a life-changing event for a young person, and it is very important that school staff understands the implications and can give support to people who are doing it or thinking about doing it.

Free Admissions Essay - Care for an Ethnically Diverse Population :: Medicine College Admissions Essays

Admissions Essay - Care for an Ethnically Diverse Population Crayfish tails in tarragon butter, galantine of rabbit with foie gras, oxtail in red wine, and apple tartelletes. The patient had this rich meal and complained of "liver upset" (crise de foie). Why a liver ache? I always associate indigestion with a stomach ache. In studying French culture in my Evolutionary Psychology class, I learned that when experiencing discomfort after a rich meal, the French assume their liver is the culprit. Understanding and dealing with the minor - sometimes major - cultural differences is a necessity in our shrinking world and diverse American society. Anthropology has prepared me to effectively communicate with an ethnically diverse population. My science classes, research, and clinical experience have prepared me to meet the demands of medical school. I first became aware of the valuable service that physicians provide when I observed my father, a surgeon, working in his office. I gained practical experience assisting him and his staff perform various procedures in his out-patient center. This exposure increased my admiration for the restorative, technological, and artistic aspects of surgery. I also saw that the application of medical knowledge was most effective when combined with compassion and empathy from the health care provider. While admiring my father's role as a head and neck surgeon helping people after severe accidents, I also found a way to help those suffering from debilitating ailments. Working as a certified physical trainer, I became aware of the powerful recuperative effects of exercise. I was able to apply this knowledge in the case of Sharon, a forty-three-year-old client suffering from lupus. she reported a 200% increase in her strength tests after I trained her. This meant she could once again perform simple tasks like carrying groceries into her house. Unfortunately, this glimpse of improvement was followed by a further deterioration in her condition. On one occasion, she broke down and cried about her declining health and growing fears. It was then that I learned no physical prowess or application of kinesiology would alleviate her pain. I helped reduce her anxiety with a comforting embrace. Compassion and understanding were the only remedies available, temporary though they were. To confirm that medicine is the best way for me to help others, I assisted a research team in the Emergency Room at University Medical Center (UMC).

Ic to Nano

SAY IC TO NANO!!!!! A Paper On â€Å"Nano – Internal Combustion Engines† Paper Presented By, N. TONY V. KUMAR III B. TECH. IIIB. TECH. MECHANICAL ENGINEERING MECHANICAL ENGINEERING G. PULLAREDYENGG COLLEGE G. PULLAREDDYENGG COLLEGE [email  protected] com ph:9573071011 ph:9493205458 [pic] Introduction:What is nano technology? Its worth pointing out that the word nanotechnology has become very popular and is used to describe many types of research where the characteristic dimension are less than about thousand nano meter If we are to continue these trends we will have to develop a new manufacturing technology which will let us inexpensively build nano system with mole quantities that are molecular in both size and precision and are inter connected in complex patterns NANO TECHNOLOGY WILL DO THIS. What is heat engine?Heat engines work on the principle of converting chemical energy into mechanical work and evolve from external combustion engine to internal combustion engi ne. External combustion engine is the heat engine in which fuel combustion takes place external to cylinder. Due to this it is bulky and consumes lot of place. Second revolution of heat engines are ICE in which fuel combustion takes internally and consumes less place and became compact, cost effective. Of late third revolution is NANO Internal Combustion Engine. It is difficult to thread- in a needle.Imagine working with an instrument with one billionth of meter. Construction of â€Å"Nano† – A 0. 1cc Compression Ignition Engine: [pic] The Nano is a 0. 1cc (that's less than 0. 01 cuin) compression ignition engine – most frequently, if somewhat inaccurately, referred to as a â€Å"diesel†. It was designed by Richard Gordon and the plans were included as a supplement with the British Magazine Model Engineer in the early 1990's [pic] An idea of the size of the Nano is given by this picture. From backplate to drive washer is less than 1 inch.There are no exot ic materials required. The crankcase is hacked from a solid cube of aluminum 3/4†³ on a side. The piston and contra piston are cast iron. The crankshaft and liner are any old steel from the scrap box. [pic] Here is an exploded view of the engine. The odd looking thing in the foreground is a special Nano-Spanner required to tighten the back plate. It also fits the fuel nipple. The construction is extremely conventional – only the scale is unusual. [pic] Like all model IC projects, there are a few special jigs and tools required to construct the Nano.All are fully detailed in the plan, which includes step by step instructions with photos. The cutter is made from water hardening drill rod (called â€Å"silver steel† in the UK because of its appearance – it contains no silver). the teeth are formed of Dermal-type cut-off wheel. [pic] The cutter is used to form the exhaust ports in the cylinder. There are three of these, spaced at 120 degrees with sufficient spa ce between them for the angled transfer ports to slightly overlap the timing. The crown of the piston is conical to assist transfer.The contra piston has a matching concave conical depression. [pic] As mentioned previously, the crankcase is formed from a cube of aluminum. The venturi is machined separately and secured with Lok-Tite before the final reaming of the crankshaft journal. Notice the three transfer passages in the photo. These terminate in a transfer belt below the cylinder seat that matches with the cylinder transfer ports. If you look very closely, you'll also see the stuff-up that turned away part of the venturi opening. Always happens on the last operation! n [pic] There's nothing special in the crankshaft components. Another jig (not shown) is made to hold the shaft in the 3-jaw chuck, offset by half the throw for forming the crank pin. Even at these sizes, final lapping to size is no different from larger engines in terms of the amount of metal that must be LEFT for removal. Only the microscopic size makes things difficult. The prop driver knurls were formed with a thread form tool, set on edge and used as a shaper. The prop nut is anodized in the usual way. [pic]Again, apart from their size, there's nothing special about the needle valve components the needle itself was made from steel and â€Å"blued† it by a quick heat in a gas flame followed by water quenching. No big deal, but the amazing thing is the attention it draws with people who examine the engine. This costs just US$10(Rs. 440/-) only. When it was fired, it run briefly, oscillating back and forth about TDC like over compressed diesels with small mass fly wheels are won’t to do. Running! .but spring starters are the only way to start ultra small diesels – hand propping just won't work.Also, the fuel for mini diesels needs a lot of ether – as high as 50% by volume. With high ether fuel and a spring starter, the little Nano will burst into life. Richard Gor don claims it will turn 40,000 rpm – yes, that's no typo, forty thousand revolutions per minute. American engine builder Ron Colona used to demo his at model engineering shows and turning at better than 20,000 rpm. | | | |The Components Used: | | | | | |[pic]Crankcase | | | | | |[pic]Backplate | | | | | |[pic]Cylinder and Head | | | | | |[pic]Venturi and Needle Valve Assembly | | | | | |[pic]Conrods and Crankshafts | | | | | |[pic]Piston and Contra-Piston | | | | | |[pic]Final Assembly and Test Report | | | | Crankcase and Cylinder rough-out: The crankcase starts off as a chunk of aluminum bar of about 1-1/2†³ diameter, sawn to length, plus a little bit. The first step is to finish turn the front section with a 1/4†³ radius where the journal blends into the body. The photo shows the roughing out process. Note that the tool is raked back sharply while â€Å"hoggin' great cuts† are made so that if it digs in, the cut will be forced shallower, not deeper as it w ould be if the tool were set raked forward like a regular knife tool.Next we need to remove all the excess aluminum that does not look like a crankcase. This can easily be done with a band saw, or less easily done with a hacksaw! In either case, marking out is simplified by preparing a full size profile on paper, centered in a circle the same size as the bar stock. Mine was done from the CAD drawings, but pencil and compass could achieve the same result with about the same effort. The paper template has a hole cut roughly in the middle to accommodate the journal and the blended radius where it meets the front face. It is attached to the face with a standard glue stick. If you're careful, this will last long enough to complete the butchery. Saw to within about 1/32†³ (1mm) of the outline.Take care because heat buildup will melt the glue. The next photo shows the four basic stages in crankcase manufacture: [pic]Bar stock blank [pic]Journal turned and sawing template glued in plac e [pic]Crankcase rough sawn to within 1mm of the template outline [pic]The finished crankcase [pic] Backplate: The back plate is simple turning with only some aspects of work holding posing any problems. In this first shot, the back plate profile has been turned on a piece of bar stock with the interior face oriented towards the tailstock. This means we will be screw cutting towards the shoulder formed by the back plate rim, so a thin (0. 20†³) run out groove is first cut at the thread/rim junction to the depth of the thread form. This also assures the back plate will form a tight seal against the rear of the crankcase. The thread cutting tool is a piece of 1/4†³ diameter HSS steel, ground to a 60 degree point with seven degrees of side rake, mounted in a tracting tool holder. This magnificent gadget takes a while to make but is absolutely invaluable to thread cutting. The little ball lever actuates a spring loaded, over center cam – just requiring a flick to retrac t the tool bit by about 3/16†³. This allows the saddle to be repositioned for the next cutting pass without having to twiddle dials and remember settings.The cylinder blank has now been replaced in the 3 jaw chuck with the top of flange against the jaws and some thin aluminum shim (beer can material) around the outside to protect the finish and thread. The bore will be drilled so as to leave 8 to 10 thou to be removed by the reamer. It is pilot drilled first. I'm told its good practice to select a pilot size no grater than half the next drilling size to prevent the next size wandering. Here we see the reamer being floated into the bore using the tailstock (larger hand reamers will have a dimple in the end which assists this operation. For this operation, the headstock is turned by hand. Keep up plenty of suds and never rotate the chuck backwards. The reamer is prevented from rotating by resting the tap handle on the compound slide.A piece of shim material protects the slide fro m damage by the handle. The transfer ports of the weaver are unusual. They comprise 5 vertical channels, spaced equidistantly around the forward 180 degrees of the cylinder. They terminate in a â€Å"transfer belt† below the exhaust ports. This arrangement avoids the induction port at the cylinder rear. These ports cannot be cut before reaming (or boring) as their presence would make it impossible to cut the bore accurately. This flash-failure shot shows how they are drilled. A short aluminum (or brass) plug is turned to be an interference fit up the bore. The holes are then drilled at the intersection of the cylinder and plug.The cylinder wall will be quite thin adjacent the transfer passages, but by using a slightly softer material for the plug, the drill will incline towards the softer material, preventing any danger or a ruined part. Venturi and Needle Valve Assembly: In the previous section, the cylinder had progressed to a nearly finished state, still requiring internal lapping. Lapping should always be the last operation on a cylinder of this type. This means the boss for attaching the side port venturi must be fitted before lapping can be done. In this session, the boss is made and the associated parts for the venturi and needle valve. The boss will be soft soldered to the cylinder (diesels don't get hot enough to melt soft solder). â€Å". older does not make the joint, it only keeps the air out† and schooled me to make a good fit of parts to be soldered. The boss will butt to the cylinder, which has an outside diameter of 0. 500†³. So, a good fit can be achieved by profiling the boss with a 1/2†³ end mill. In this photo, we see the boss blank (enough for four) which has been finished outside, drilled ready for tapping and transferred still in the 3 jaw chuck to the mill for end profiling. Applications: Nano IC engine has various applications ranging from race cars to space crafts. ? In race cars this IC Nano Engine was used. T he engine was fully fabricated, that is, no castings were employed. | | | | | | | | | | | | | |[pic] | |It can be controlled in aero planes/satellites/space ships etc. , the timing of in let and exhaust valves. | |According to NASA reports they are experimenting about the use of nano engine in nano & pico satellites. | |In case of a mine tragedy where harmful gases are emitted ,these nano IC engines can be employed as powerful blowers to blow out these gases is a | |less time saving the lives of trapped miners .We require at least 5-6 blowers to blow these gases where as two nano IC engines could do the tick in| |less time. | |Agriculture pumps sets. | |Every field of industry. | |Prospects: | |The problem | |Every day people are spending more and more money because of rising gas prices. People all over the world are trying to find a solution—even | |visiting websites to locate the nearest and cheapest gas, all the while losing time and mileage just to reach [these] refueling stations. Many have| |been giving up favorite hobbies and changing life plans because of the need to reallocate their funds for gas.For those of us who must drive to | |work or school, it seems we have little choice but to continue paying more. Now, there is a way to fight back against these constant increases in | |gas prices—and to fight pollution and protect the environment in the process. | | | |The solution | |Use the most advanced technology available to improve fuel economy, prolong the engine life, reduce harmful emissions and protect the environment. | |The number one product for fuel economy, power and pollution control is now available. |Introducing our two unique nanotechnology products: | |F2-21 NanoLube Engine Oil Treatment, and | |F2-21 NanoRon Gas & Diesel Fuel Enhancer. | |With nanotechnology, fuel transforms at the nano-level to achieve a more complete combustion, resulting in increased fuel economy, more driving | |power, and fewer pollutive emissions. | | Use either product or both to get multiple benefits: | |  Ã‚  Ã‚   –   Adds great power to your engine. NanoLube eases heavy driving loads and increases   | |  Ã‚  Ã‚  Ã‚  Ã‚      Driving  pleasure with a faster, smoother, and quieter ride. |  Ã‚  Ã‚   –   Boosts miles per gallon (analogous to buying Premium Gas or boosting your octane number), | |  Ã‚  Ã‚  Ã‚      While saving you money and conserving energy. | |  Ã‚  Ã‚   –   Prolongs engine life by cleaning your combustion chamber and piston ring deposits, | |  Ã‚  Ã‚  Ã‚      Extending engine life and cutting equipment downtime. | |  Ã‚  Ã‚   –   Protects the environment by reducing harmful emissions and fighting global warming. | | | | | |[pic] | | | Summing upWith the application of Nano in every sphere of life the ‘big’ may not find its place in engineering dictionary in future. If we are to continue these trends we will have to develop a new manufacturi ng technology, which will let us inexpensively build nano system with mole quantities that are molecular in both size and precision and are, inter connected in complex patterns NANO TECHNOLOGY WILL DO THIS. NANO technology with all its challenges and opportunities is an avoidable part of our future. It can be rightly said that nano technology slowly and steadily assuring in the next Industrial Revolution. Bibliography †¢ www. Bbc. co. uk †¢ [email  protected] com †¢ www. google. co. in